Motorola RM
CPS and Cloning Cables (Optional Accessory) • Both CPS and Cloning Cables are made to work either with RM Series radios or RDX Series radios. Cloning cable supports a mix of RM and RDX series radios. • CPS cable programs RM series radios. Make sure the cable switch is in “Flash” position. To program a RDX radio with the CPS cable, make sure the cable switch is in “CPS” position and the USB converter provided in the CPS cable kit is attached to the cable. • Cloning cable allows you to clone: –RM Series radios. Make sure the switch is in “Cloning” or “Legacy” position. –RDX Series radios. Make sure the switch is in “Legacy” position with one USB converter on each end of the cloning cable. –RM Series and RDX Series radios. Make sure the switch is in “Legacy” position and use a USB converter to the RDX Single-Unit Charger. The Cloning Cable Kit provides 1 USB converter.
show ‘Pass’ or ‘Fail’ on the display (a voice announcement will be played within 5 seconds). Once you have completed the cloning process, turn the radios OFF and ON to exit the ‘cloning’ mode. Further details on how to clone radios are explained in the Instructions Sheet provided with the MUC. When ordering the MUC, refer to P/N# PMLN6384_. Notes: • If cloning fails, refer to “What To Do If Cloning Fails” on page 46. • Paired Target radios and Source radios must be of the same band type in order for the cloning to run successfully. • MUC pockets numbers should be read from left to right with the Motorola Solutions logo facing front. 5.
PROGRAMMING FEATURES
44
English
Made with FlippingBook Annual report maker